Humidity Chamber, Humidity Chambers, Laboratory Oven, Walk In Cold Chamber, Muffle Furnace, Nasik, India
 

Humidity Chamber

Humidity Chamber, Humidity Chambers, Laboratory Oven, Walk In Cold Chamber, Muffle Furnace, Nasik, India
About Us Products Software Service and Support Certification Clients
 
 
 
TECHNICAL SPECIFICATION
Temperature Range:  20°C - 60 °C
Humidity Range: 40%RH - 95%RH
Accuracy: ±0.2 °C / ±2.0 % RH
Uniformity: ±1.0 °C / ±3.0 % RH
Test suitable for: 25°C & 60%RH,
30°C & 75%RH, 40°C & 75%RH
30°C & 75%RH
Specially designed Chambers for Low Humidity conditions such as 25°C & 40%RH, 40°C & 25%RH, 30°C & 35%RH.
Humidity Chamber
 
 
 
Models
Material of Construction
Interior
Exterior
MK1
S.S.304 Dull Finish
G.I  Powder Coated
MK2
S.S.304 Dull Finish
S.S.304 Dull Finish
MK3
S.S.316 Dull Finish
S.S.304 Dull Finish
 
     
FEATURES  
  Construction
Chamber interior is fabricated of stainless steel with dull finish & exterior is of stainless steel / G.I. Powder coated.
The inner working chamber is water & vapour tight high-grade stainless steel.
All seams are arc-welded & passivated for strength & durability.
 
   
  Insulation
Eco friendly Poly Urethane insulation provided for maximum thermal protection & to increase rigidity for reliable daily use.
 
     
  Full View Glass Door
A multi pane viewing door prevents condensation & allows product view. Inner & outer doors are sealed around the entire perimeter by silicone sponge rubber gasket.
 
     
  Leveling Legs
Bullet feet ensure easy mobility during installation & cleaning. Bullet feet’s are specially designed for long life under heavy load with built in screwing adjustment
 
     
  Air Circulation
A high efficiency air circulation system is an integral part of chamber construction. This direct drive design has an extended shaft electric motor coupled to aluminum centrifugal blower wheel. This horizontal airflow across the chamber working space provides an even & accurate temperature & humidity gradient.
 
     
  Interior Lighting
High intensity, low voltage fluorescent lights are provided. Interior light makes viewing workspace & product hassle free.
 
     
  Chamber Port
60mm diameter port with silicon cork is included for passing sensor probes into the chamber workspace for validation without altering the chamber.
 
     
  Trays
Heavy duty solid stainless steel duly electro polished wiremesh type trays are provided which are easy to clean, saving time & effort & adjustable for convenience.
 
     
  Control System
PLC based control system.
0.1C Resolution for temperature & 0.1% Resolution for RH
High stability & reliability; Security lock for prevention of unauthorized tampering; Non Volatile memory.
 
     
  Heating System
High efficiency, low watt density S.S. tubular air heaters are used with ceramic core.
The combination of air flow, instrument response & fast reacting heaters provides very accurate & straight line control of temperature.
These heaters have a long life & are very reliable with no down time
 
     
  Refrigeration System
A single stage refrigeration system with a hermitically sealed reciprocating compressor.
Fin & tube type bullet expanded evaporator are used. High efficiency fin & tube type bullet expanded condenser coils are used.
Refrigeration design protects compressors & prolongs life keeping cool during all operating condition. Refrigeration design uses less power saving operating cost.
 
     
  Humidity System
Humidity is generated by water evaporation in separate compartment providing a water droplet free atmosphere. This ensures excellent uniformity & stability of the chamber environment. A reservoir water tank is provided which is fitted with float valve to maintain the water level in the steam generator tank.
 
     
  Safety System
PLC based safety controller is provided having five-safety cut-off with Auto Reset facility.
Lower 1 Temp cut-off (Below set Point): Cut off Refrigeration system with audio visual indication
Lower 2 Temp cut-off (Below set Point): Cut off Load supply with audio visual indication
Higher 1Temp cut-off (Above set point): Cut off Heating system with audio visual indication
Higher 2 Temp cut-off (Above set point): Cut off Load supply with audio visual indication
Boiler safety: Low water level cut-off, when water is not present in the steam generator tank.
 
     
  Scanner
For validation purpose Temp / Humidity multipoint scanner can be provided with printer & PC interface facility.
 
     
  21 CFR PART-11 Compliance
Audit Trail, E-Records& E-signatures, and Graphical analysis & Data acquisition.
 
     
  SMS Mobile Alert System
With GSM technology we will get malfunction SMS of equipment on Mobile Phones.
 
     
  Humidity System
Humidity is generated by water evaporation in separate compartment providing a water droplet free atmosphere. This ensures excellent uniformity & stability of the chamber environment. A reservoir water tank is provided which is fitted with float valve to maintain the water level in the steam generator tank.
 
     
NOTE: MK * - MK1 / MK2 / MK3  
 

MK** -S100H: Split type Condensing Unit
MK** -S200H & MK** -S300H are Panel & Trolley type (Split Type Condensing Unit)

 
     
Protocol for IQ, OQ, PQ and DQ - Documentation........ Read Here  
     
   
  Our Product Range:
Humidity Chamber
B.O.D Incubator
Photostability Chamber
Cold Chamber
Walk-in Humidity Chamber
Deep Freezer
Bacteriological Incubator
Hot Air Oven
Documentation
   
  About Us:
Who We Are
What We Do
What Distinguish Us
Our Commitment

SIZE
Models
MK*-10H
MK*-20H
MK*-40H
MK*-60H
MK*-80H
MK*-100H
MK**-S100H
MK**-S200H
MK**-S300H
Features
100 Ltrs
200 Ltrs
400 Ltrs
600 Ltrs
800 Ltrs
1000 Ltrs
1000 Ltrs
2000 Ltrs
3000 Ltrs
Interior Dimension
Width in mm
600
600
700
700
800
900
800
1600
2400
Depth in mm
350
400
600
800
800
850
800
750
750
Height in mm
550
850
950
1100
1250
1350
1600
1700
1700
Exterior Dimension
Width in mm
700
700
800
800
1120
1220
1120
1980
2780
Depth in mm
1020
1070
1270
1470
1470
1520
1470
1325
1325
Height in mm
1415
1715
1815
1965
1850
1950
1850
1860
1860
Trays
No of Trays
2
2
3
3
4
4
4
8
12
Type
Wiremesh Type
Tray spacing
Every 1/2" Adjustable
-
-
Power Supply
Power Supply
Single Phase, 230V 50Hz
Power Rating
2KW
2KW
3KW
3KW
4KW
4KW
4KW
6KW
6KW
Warranty
12 Months
  *Other sizes also available as on requirement.
 
OPTIONAL FEATURES
  21 CFR PART 11 COMPLIANCE
STAND BY REFRIGERATION SYSTEM
STAND BY STEAM GENERATOR SYSTEM
SCANNER

EXTRA TRAY
 
Go To Top
  Home | About Us | Products | Softwares | Services | Contact Us | Enquiry
  Copyright © 2007 Mack Pharmatech Pvt. Ltd. All rights reserved.